Siemens Synco OZW772 Series User Manual

41 / 176
Siemens Web server OZW772... V6.0 CE1C5701en
Building Technologies Commissioning 2015-10-12
Path: Home > 0.2.150 OZW772.xx > Settings > Consumption data > Receiver
Do the test if the Web Server sends consumption data via e-mail.
Data point
Explanation, example
Test receiver
Default val: ---
Setting val: ---, Trigger
"Test receiver" tests the connected to the
selected receiver.
—
Consumption data sent
Display val: ---, Yes, No
The display changes after a few seconds from
"---" to
Yes: Message sent successfully.
No: Message receiver not reached.
—
Cause
Display val:
---, Network cable, DNS setting,
Address mail server, Port
number mail server, E-mail
address receiver, Authentication
mail server.
"Cause" displays the results of "Test receiver".
For "Yes" the cause is "---"
For "No" the cause is displayed.
The first fault is displayed for multiple faults.
—
2.8 Additional settings
You can determine whether a device in the device list can be operated under
"Home".
You can only hide devices on the "Administrator" user level.
Procedure:
1. Select "Device web pages"
2. Select
the device you want to hide.
3. Click [ Hide ]
Click [ Generate ] again to show the device. This may have an impact on the
display of any existing meters in the consumption data file (For details see Section
6.2, Sections replace meter and section Start value Web Server).
Path: Home > 0.2.150 OZW772.xx > Settings > Faults
We recommend deleting the history after you have completed commissioning.
The workflow is described in Section 2.5.3.9, "Faults".
Test e-mail receiver
consumption data
Note
Hide devices
Note
Note
Delete history
Note

Siemens Synco OZW772 Series Specifications

General

Brand	Siemens
Model	Synco OZW772 Series
Category	Server
Language	English