2-1
SECTION 2
DISASSEMBLY
DCR-TRV725E/TRV730/TRV730E/TRV828/
TRV828E/TRV830/TRV830E
The following flow chart shows the disassembly procedure.
2-1. LCD unit, PD-138/139 board (2.5 inch LCD model)
PD-138/139 board service position
2-2. LCD unit, PD-139 board (3.5 inch LCD model)
2-3. Front panel section, SI-030 board
PD-139 board service position
SI-030 board service position
CF-084, SI-030 boards service position
LB-071, CF-084, SI-030 boards service position
CD-329, CF-084, SI-030 boards service position
2-4. Cabinet (R) section
2-6. CF-084 board
2-5. Control switch block (SE-1380), FP-315 board
2-15. Hinge section
2-7. EVF section, LB-071 board
2-8. Lens section, CD-329 board
MM-043, CF-084, SI-030 boards service position
Mechanism deck service position-1
2-9. MM-043 board
2-10. Battery panel section, Battery terminal board
2-11. Control switch block (SS-1380), FU-155 board
2-12. Cabinet (L) section, Mechanism deck-1
2-14. Mechanism deck-2, MD frame (M)
2-13. VC-262 board
[CONNECTION DIAGRAM FOR SERVICE POSITION (Mainly for voltage measurement and check)]
(VC-262, FU-155, CD-329, SI-030, MM-043, CF-084 boards, Mechanism deck-2)
2.5 inch LCD model : DCR-TRV725E/TRV730/TRV730E
3.5 inch LCD model : DCR-TRV828/TRV828E/TRV830/TRV830E
DCR-TRV725E/TRV730/TRV730E/TRV828/TRV828E/TRV830/TRV830E
To Next Page
Loading...
