Dubbingsoundto a
recordedtape []
You can record additional audio to the
original sound on the tape. Yon can add
sound to a tape already recorded in the 12-bit
mode without erasing the original soun&
O Intelligent accessory
shoe for DCR-HC4O
See page 139.
Internal microphone
OMIC (PLUG tN POWER) jack
f_ZZZ__
Microphone (optional)
ONV jack
A/V connecting cable (supplied)
CCC_22_Signal flow
S video plug (black)
and the Video plug
(yellow).
Audio outputjacks
Audio device (such as
CD/MD players)
(white)
-Audio R(red)
Record audio in one of the following ways.
• Using the internal microphone (no connection
required).
• Connecting a microphone (optional) to the
MIC jack. (O)
• Connecting a microphone (optional) Io the
intelligent accessory shoe for DCR-fIC40. (O)
• Connecting audio device co your camcorder
using an A/V connecting cable. (_)
The audio input to be recorded takes precedence
over others in lhe order of MIC jack --_
intelligent accessory shoe for DCR-HC40 --_
A/V jack --* inlemal microphone.
Notes
• You canno_ record additional audio:
When the tape is recorded in the 16-bit mode.
When the tape is recorded in the LP mode.
When your camcorder is connecled via the i.LIN K
cable.
On blank sections of the tape.
When _he write-protect tab of the cassette is set to
SAVE.
• When you are using the A/V iack or the internal
microphone to record additional sound, the pioure
will not be output from the S VIDEO jack or the
A/V jack. Check _he picture on the LCD screen or
the viewfinder.
• When you use an external microphone (optional) to
record additional audio, you can check the picture
and the sound by connecfi ng your camcorder to a TV
using the A/V connecting cable. 1towever, _he sound
104 Dubbing/Editing
To Next Page
Loading...
Need help?
General