PHOTO
Recordingwith ease
- EasyHandycam
With this Easy Handycam operation, most of
the camera settings are set to automatic
mode, only basic functions become available,
and screen font size increases for easy
viewing. Even first time users can enjoy easy
recording. Before recording, follow steps 1 to
7 in "Getting started" (p. 15 to p. 25)
Camera recording lamp EASY POWER switch
Press PHOTO folly during tape recording.
,Eso_ _ _c_Io Recording" 'is
complete when the
scrolling stops.
To recordstill imagesin standby mode
Press and hold PHOTO lightly. Check the
image and press it fully.
'_" Tip
• For DCR-IIC4O:
The image size is set to [640 × 480].
If you want to record a still image in a different size,
use the Memory photo recording function (p. 3 I).
0 Notes
• You cannot record a still image on a "Memory Stick
Duo" during the tbllowing operations:
- [16:9 WIDE] mode
Memory overlap
MEMORY MIX function
[INTERVAL REC] (interval recording)
• Titles are not recorded on a "Memory Stick Duo."
REC START/STOP
During Easy Handycam operation, you can
record movies on a tape only. To record
movies on a "Memory Stick Duo," see
page 26 (MPEG MOVIE EX).
Set the LENS COVER switch to
OPEN.
Open the LCD panel.
34 Recording
To Next Page
Loading...
Need help?
General