Searchingfor the
starting point []
POWER switch
This function is handy when you have played
back the tape, for example, but want to start
recording right after the most recently
recorded scene. When you use a cassette
without Cassette Memory, the END
SEARCH function will not work once you
eject the cassette after you have recorded on
the tape. If you use a cassette with Cassette
Memory, it will function even when you have
ejected the cassette.
Slide the POWER switch repeatedly to
select the CAMERA-TAPE mode.
Touch _.
3 Touch [_.
16°m__• xl oeooo
ENO SEarcC_
"(m_r_-#_-------" _-_.. Appears only with a
cassette with
Cassette Memory
The last scene of the most recent recording
is played back tbr about 5 seconds, and lhe
camcorder enters 1he standby mode at the
point where the last recording has finished.
¢9
To cancel the operation 8
Touch [CANCEL]. __.
0 Note
• The END SEARCH funoion will not work correctly
when there is a blank section between recorded
sections on the tape.
'_" Tip
• You can do this operation also by selecting [END
SEARCH] in the menu setting. When PLAY/EDIT
mode is selected, you can do flds operation
by selecting [END SEARCH l shorl-cut on
(p. b2).
You can search for the start point while
viewing the pictures on the screen, The sound
is not played back during the search.
Slide the POWER switch to select the
CAMERA-TAPE mode.
Touch [_'_.
,->continued
Recording 47
To Next Page
Loading...
Need help?
General