Step 5: Setting the
date andtime
4 Touch IMENU].
Set the date and time when using this
camcorder for the first time. If you do not set
the date and time, the [CLOCK SET] screen
appears every time you turn on your
camcorder.
0 Note
• If you do not Ilge your camcorder for abou_ 3
months, the built-in rcchargeable button-type
battery gets discharged mid the date and time
settings may be cleared from the memory. In thai
case, charge the reehargeable button-type boltery
(p. 134) and then set the date and time again.
POWER switch
Turn on your eamcorder (p. 19).
Open the LCD panel.
Proceed to step 7 when you set the clock for
the first time.
3 Touch _.
@
Select _:_ (TIME/LANGU.) with
[[_/[[_, then touch [_.
g6e_ E ......
Select [CLOCK SETI with [[_/[[_,
then touch [i_-
_TE
Set IYI(year) with [[]_ / [5_, then touch
.......]1
13_TE
You can set any year up to the year 2079.
Set [M] (month), ID] (day), hour and
minute in the same way as was done in
step 7, then touch [_.
For midnight, set it to 12:00AM.
I:or midday, set it to 12:00PM
22 Getting started
To Next Page
Loading...
Need help?
General