You can superimpose a still image you have
recorded on a "Memory Stick Duo" over the
movie you are currently recording on a tape.
You can then record the superimposed
pictures on a tape or a "Memory Stick Duo,"
(You cannot superimpose a still image on a
tape which you have already finished
recording.)
[M,--CAM LUML] (Memory Luminance
key)
You can swap 1he brighter (while) area of a still
image inlo a movie. To use 1his function, have a
still image of an illustration or title handwritten
on while paper recorded on a "Memory Stick
Duo" beforehand.
Still image Movie
[CAM_--M CHROMA] (Camera Chroma
key)
You can superimpose a movie on top of a still
image, such as an image which can be used as
background. Shoot the movie with lhe subjecl
against a blue background. Only the blue area of
lhe movie will be swapped with the still image.
Still image Movie
+
Blue
[M*--CAM CHROMA] (Memory Chroma
key)
You can have tbe movie swap inlo dae blue area
of a still image such as an illustration or into a
frame with a blue area enclosed by the fi'ame.
Stile image Movie
,+
Blue
Check that you have a "Memory Stick
Duo" with the still image to be
_o
superimposed and a tape (only if you
are recording on tape) in your __
camcorder. _t_
Slide the POWER switch repeatedly to
select the CAMERA-TAPE mode
(when you are recording on a tape) or
the CAMERA-MEMORY mode
(when you are recording on a
"Memory Stick Duo").
3 Touch _.
4 Touch [MEMORY MIX].
If the item is not displayed on the screen,
touch E_/[_- If you cannot find it, touch
[MENU], and selecl it from the _ (PICT.
APPLI.) menu.
The still image stored in the "Memory Stick
Duo" will be displayed on the thumbnail
screen.
Thumbnail screen
Touch _ (previous)/E_] (next)to
select the still image to overlap.
-_continued
Recording 45