AdJustingthe
exposure
The exposure is adjusted automatically in the
default setting.
When your subject has its back to the sun or
other light, you can adjust the exposure to
prevent the subject from becoming
shadowed.
BACK LIGHT
Press BACK LIGHT during recording or
in the standby mode.
[] appears.
To cancel |he back light function, press BACK
L1GttT again.
fJ Note
• The back light function is canceled when you sel
[EXPOSURE] m [MANUAL] (p. 38) or select
[SPOT METER] (p. 37).
You can adjust and fix the exposure to the
subject, so that it is recorded in suitable
brightness even when there is strong contrast
between the subject and the background
(such as subjects in the limelight on stage).
Touch _ during recording or in
the standby mode. /
Touch [SPOT METER].
m,
If the item is not displayed on the screen, =
touch E_/[_3. If you cannot find it, |ouch €_
[MENU], and select it from the
(CAMERA SET) menu.
3 Touch the point you want to adjust and
fix the exposure on the screen.
[SPOT METER] flashes while the camera
is adjusting the exposure for the selected
point.
4 Touch [END].
Toreturnthesettingto automatic
exposure
Follow s|eps I and 2, |hen select [AUTO] in
s|ep 3. Or set [EXPOSURE[ to [AUTO[ (p. 38).
,->continued
Recording 37
To Next Page
Loading...
Need help?
General