3 Slide the POWER switch until the
CAMERA-TAPE lamp lights up.
_EP_ Slide the POWER
switch while
pressing the green
button.
4 Press EASY.
The EASY lights up in blue.
Easy Handycam
operalbn
ON
Press REC START/STOP.
Recording starts. [REC] 3ppears on the
LCD screen ond 1he Camera recording lamp
lights up. Press REC START/STOP 3gain
to slop recording.
Toturnthe poweroff
1 Slide the POWER switch up to the OFF
(CHG) position.
2 Set the LENS COVER switch to CLOSE.
To cancel Easy Handycam operation
Press EASY again.
0 Notes
• YOU cannot turn Easy I[_ndycam operalion on or off"
during:
Recording
USB Streaming
• During Easy Handycam operation, the following
buttons are not available.
LCD BACKLIGBT(p. 2g)
BACK LIG!tT(p. 37)
• During Easy 1tandycam operation,_be settings ofthe
functions that are nol displayed on _he screen return
to their det:ault s. Previously made settings are
reslored when you cancel Easy Bm_dycam
operagon.
Set the LENS COVER switch to
OPEN.
Open the LCD panel.
Slide the POWER switch repeatedly
until the CAMERA-MEMORY lamp
lights up.
[_'_11 C4_IEP_ Slide the POWER
switch while pressing
the green button.
8
4 Press EASY.
The EASY lights up in blue.
Press and hold PHOTO lightly.
You will hear a light beeping sound when
lhe focus and brightness settings are
adjusted. Recording does not start at this
point.
,->continued
Recording 35
To Next Page
Loading...
Need help?
General