ENGINE 3-55
VALVE GUIDE SERVICING
• Using the valve guide remover 1, drive the valve guide out
toward the intake or exhaust camshaft side.
" 09916-44310: Valve guide remover/installer
NOTE:
* Discard the removed valve guide subassemblies.
* Only oversized valve guides are available as replacement parts.
(Part No. 11116-06B70)
• Re-finish the valve guide holes in the cylinder head using the
reamer and handle.
" 09916-34580: Valve guide reamer
09916-34542: Valve guide reamer handle
• Install a ring onto each valve guide. Be sure to use new rings.
• Oil the stem hole of each valve guide and drive the guide into
the guide hole using the valve guide installer.
2 Valve guide
3 Cylinder head
" 09916-44310: Valve guide remover/installer
!
Failure to oil the valve guide hole before driving the new
guide into place may result in a damaged guide or head.
• After installing the valve guides, re-finish their guiding bores
using the reamer. Be sure to clean and oil the guides after ream-
ing.
" 09916-34570: Valve guide reamer
09916-34542: Valve guide reamer handle
NOTE:
Insert the reamer from the combustion chamber and always turn
the reamer handle clockwise.
To Next Page
Loading...
Need help?
General
