Tektronix TDS3000 Series User Manual

Measure
TDS3000 Series User Manual
3–33
Measure
Push the MEASURE button to show the measure menu.
Bottom Side Description
Select
Measurement
See table on page 3–37 for a descrip-
tion of the automatic measurements.
R
emove
Measurement
Measurement 1
Measurement 2
Measurement 3
Measurement 4
Removes a specific measurement.
All Measurements Removes all measurements.
Ga
ti
ng
Off Use to take measurements on the full
waveform record.
Screen Use to take measurements on the
portion of the waveform on screen.
Cursors Use to take measurements on the
portion of the waveform between the
V Bar cursors.
Bring Selected
Cursor to Center
Screen
Moves the active cursor to center
screen.
Bring Both Cur-
sors On Screen
Moves any off-screen cursor onto the
screen.
H
i
gh-L
o
w
Set
up
Auto Select Automatically uses the best measure-
ment method depending on the signal
characteristics.
Histogram Use to measure pulses.
Min-Max Use to measure other wave shapes.
MEASURE

Tektronix TDS3000 Series Specifications

General

Brand	Tektronix
Model	TDS3000 Series
Category	Test Equipment
Language	English