TDS3000 Series User Manual
F–1
Appendix F: General Care and Cleaning
General Care
Protect the oscillscope from adverse weather conditions. The
oscilloscope is not water resistant.
Do not store or leave the oscilloscope where the LCD display will be
exposed to direct sunlight for long periods of time.
CAUTION. To avoid damage to the oscilloscope, do not expose it to
sprays, liquids, or solvents.
Cleaning
Inspect the oscillosope as often as operating conditions require. To
clean the oscilloscope exterior, perform the following steps:
1. Remove loose dust on the outside of the oscilloscope with a
lint-free cloth. Use care to avoid scratching the glass display
filter.
2. Use a soft cloth or paper towel dampened with water to clean the
oscilloscope. You can use a 75% isopropyl alcohol solution for
more efficient cleaning.
CAUTION. To avoid damage to the surface of the oscilloscope, do not
use any abrasive or chemical cleaning agents.
To Next Page
Loading...
Need help?
General
