Application Examples
TDS3000 Series User Manual
2–23
Using the Disk Drive
You need to do some work inside a remote site. You expect to use
the oscilloscope to look at signal waveforms and then bring
waveform information back to the office to complete a report and
perform additional analysis. To do this, take along an IBM-compat-
ible floppy disk.
Remote site
When you need to capture screen images, it may be most convenient
to first save them to disk. Once on the disk, you can load the screen
images into a PC, print hard copies with a printer attached to the
oscilloscope or your PC, or import the screen images into desktop
publishing software to produce a report.
You can also save waveform data on the disk. From the disk, you can
recall waveforms to the oscilloscope display or you can import the
data into spreadsheet and Mathcad software to perform additional
analysis.
If you have oscilloscope setups that you want to use again, you also
can store them on the disk. See Save/Recall on page 3–40 for more
information on this capability. For information about remote control
of the oscilloscope and network printing, see the AD007 and
WSTRO accessories on page C–4.
To Next Page
Loading...
Need help?
General
