Utility
3–60
TDS3000 Series User Manual
Utility
The following are examples of what you can do with each of the six
branches in the Utility menu:
Use Config to select a language or set the time and date.
Use Apps if an installed application module places items in this
menu. See the documentation provided with your application
packages for more information.
Use I/O to set up the communication ports.
Use Hard Copy to set up hard copy parameters. Refer to Hard
Copy on page 3–21 for information about setting up and printing
a hard copy.
Use Cal to compensate the signal path.
Use Diags to run internal diagnostic routines.
Push the UTILITY button to show the utility menu. Then, push the
System screen button to choose the branch. The remaining items in
the utility menu change depending on the branch you choose.
To Next Page
Loading...
Need help?
General
