9
SLUUBD3D–September 2015–Revised September 2018
Submit Documentation Feedback
Copyright © 2015–2018, Texas Instruments Incorporated
Preface
Read This First
SLUUBD3D–September 2015–Revised September 2018
Preface
Read this First
This manual discusses the modules and peripherals of the bq78350-R1 device, and how each is used to
build a complete battery pack gas gauge and protection solution.
Notational Conventions
The following notational conventions are used if SBS commands and data flash values are mentioned
within a text block:
• SBS commands: italics with parentheses and no breaking spaces; for example, RemainingCapacity().
• Data flash: italics, bold, and breaking spaces; for example, Design Capacity.
• Register bits and flags: italics and brackets; for example, [TDA] Data
• Flash bits: italics and bold; for example, [LED1]
• Modes and states: ALL CAPITALS; for example, UNSEALED
The reference format for SBS commands is: SBS:Command Name(Command No.): Manufacturer
Access(MA No.)[Flag], for example:
SBS:Voltage(0x09), or SBS:ManufacturerAccess(0x00): Seal Device(0x0020)
Trademarks
All trademarks are the property of their respective owners.
To Next Page
Loading...
Need help?
General
