Texas Instruments Titanium TI-89 User Manual

Programming 618
1. Position the cursor where you want to insert the setMode command.
3. Select a mode to display a menu of its valid settings.
4. Select a setting.
Getting Input from the User and Displaying Output
Getting Input from the User and Displaying OutputGetting Input from the User and Displaying Output
Getting Input from the User and Displaying Output
Although values can be built into a program (or stored to variables in advance), a
program can prompt the user to enter information while the program is running.
Likewise, a program can display information such as the result of a calculation.
F3 I/O Toolbar Menu
F3 I/O Toolbar MenuF3 I/O Toolbar Menu
F3 I/O Toolbar Menu
2. Press:
2 ˆ to display a list of modes.
Note: The Mode menu does not let you set
the
Current Folder mode. To set this
mode, use the
setFold command.
The correct syntax is
inserted into your program.
:setMode("Graph","FUNCTION")
To enter most of the commonly used
input/output commands, use the Program
Editor’s …
I/O toolbar menu.

Texas Instruments Titanium TI-89 Specifications

General

Brand	Texas Instruments
Model	Titanium TI-89
Category	Calculator
Language	English