Connectinga VCRandantenna,CableTVorCamcorder
TVrightsidepanel
!_J Standard
I _ AN cables
TVbackpanel
E_
From Cable TV
or antenna
Frim Cable_
Cablebox |
Coaxial cable
You will need:
• Coaxial cables
• Standard A/V cables
- Ifyou have a mono VCR, connectLIMONO on the TV
toyour VCR's audio out terminal using the white audio
cable only.
Note: When you use a Cable box, you may not be able to
use the remote control to program or access certain
features on the TV.
To view the antenna or Cable signal:
Press _) and • or • to select the ANT/CABLE
To view basic and premium Cable channels:
Turn OFF the VCR. Press _) and • or • to select the
ANT/CABLE Tune the TV to channel 3 or 4 (whichever
channel the Cable box output is set to). Use the Cable
box controls to change channels.
To view the VCR:
Turn ON the VCR. Press _) and • or • to select the
VIDEO.
To view the camcorder video:
Press _) and • or • to select the VIDEO.
Note: To program the TV remote control to operate other
devices, see Chapter 3.
The unauthorized recording, use, distribution, or
revision of television programs, videotapes, DVDs,
and other materials is prohibited under the Copyright
Laws of the United States and other countries, and
may subject you to civil and criminal liability.
14
To Next Page
Loading...
Need help?
General
Weight and Dimensions
