Tuningchannels
Setting the Channel Tuning Mode
This feature allows you to choose how tuning will be
handled for analog and digital channels when the TV is
in Antenna mode.
Note: To use this feature, ANT/CABLE In must be set to
Antenna (_,v page 35),
The channel tuning mode has three options.
Both analog and digital challnels can be
Standard
tuned normally
Auto
(default)
Digital challnels will have priority
when manually entering a channel
number using the Challnel Numbers (0-
9) on the remote control, analog
challnels can still be tuned by _._ / _ if
available
Digital Only digital challnels can be tuned
To set the Channel Tuning Mode:
2
3
From the SETUP menu, highlight TV Settings and
press @.
Press • or • to highlight Channel Tuning Mode.
Press ,i or • to select your desired mode and then
press @.
Note: The Channel Options window as well as the Channel
Browser ANT/CABLE List will be updated automatically
when you change the mode. Also, the History List will be
cleared, but the Favorites List will be saved.
Tuningto the next programmed
channel
To tune to the next programmed channel:
Press _ or _j on the remote control or TV control panel.
Note: This feature will not work unless you program
channels into the TV's channel memory (_< page 35).
Tuningto a specific channel
(programmedorunprogrammed)
Tuning analog channels:
Press the Channel Number (0-9) on the remote control.
For example, to select channel 125, press 1, 2, 5, then ,_}.
Tuning digital channels:
Enter the major Channel Number (0-9) on the remote
control, followed by the dash ((_)) button and then the
sub-channel number. For example, to select digital
channel 125-1, press 1, 2, 5, -, 1, then @.
38
To Next Page
Loading...
Need help?
General
Weight and Dimensions
