Note:
° /fyou place an '_<" in the box next to "Rated "None"",
programs rated "None" or "Not Rated" will be blocked;
however, programs that do not provide any rating
information will not be blocked.
• To display the rating of the program you are watching,
press _ on the remote control If it is rated "None," the
word "NONE" appears in the INFO screen (as shown
below right). If rating information is not provided, no
rating will appear in the INFO screen.
Unlockingprograms
If you try to tune the TV to a program that exceeds the
rating limits you set, the TV will enter program lock
mode and a warning message will appear on-screen.
Follow the instructions to temporarily unlock the
program.
Lockingchannels
With the Lock feature, you can lock specific channels.
The locked channels can only be accessed by entering
the PIN (_#r' "Setting the PIN code" on page 43).
1 From the SETUP menu, highlight 13/Settings and
press _).
2 Press • or • to select Channel Options and press
_o_. The list of channels will appear.
3
4
5
Press • and then • or • to select a channel in the
lock column, then press 3.
PIN code entry will be required to set a locked
channel.
Note: If the PIN code has not been set yet, a warning
message will appear.
A check will appear in the box.
To remove the check, press _ again.
Inputlockfeature
You can use the Input Lock feature to lock the video
inputs and channels 3 and 4. You will not be able to
view the input sources or channels until you unlock the
inputs.
1 From the PREFERENCES menu, highlight
Parental Control and Locks and press _).
2 Enter your four-digit PIN code.
3 Press • or • to highlight Input Lock.
4 Press < or • to select Video, Video+ or Off and
press _.
Locks Video, ColorStream HD, HDMI 1, HDMI
Video
2, HDMI 3, HDMI 4, and PC.
Locks Video, ColorStream HD, HDMI 1, HDMI
Video+ 2, HDMI 3, HDMI 4, PC and channels 3 and 4.
° Select Video+ if you play video tapes via the
ANT/CABLE input.
Off Unlocks all video inputs and channels 3 and 4.
45