Trane IntelliPak I User Manual

30 RT-SVP04F-EN
System Operating Status
Compressor Relay K3 XXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX (MORE)
Used With: All IntelliPak I Rooftop
Units and Air Handlers with DX
Cooling installed.
Possible Values: Second Field: ON,
OFF, LOCKED
Bottom Field: Enabled or any item
from Lockout Sources List.
1. Pressing the NEXT key will scroll forward through the screens.
2. Pressing the PREVIOUS key will scroll backwards to view the
previously displayed screen.
3. Press the + (Plus) key while viewing any screen to add that screen
to the custom menu. Refer to the custom menu for the creation and
maintenance of customized menus.
4. Press the NEXT key until the following screen is displayed. (if
applicable)
Ckt 2 Compr Relay K3: OFF
Enabled............................................. (MORE)
Used With: All IntelliPak II Rooftop
units or Air Handlers with DX
Cooling.
Possible Values: K3: ON, OFF,
LOCKED; Second Field: Enabled or
any item from Lockout Sources List
1. Pressing the NEXT key will scroll forward through the screens.
2. Pressing the PREVIOUS key will scroll backwards to view the
previously displayed screen.
3. Press the + (Plus) key while viewing any screen to add that screen
to the custom menu. Refer to the custom menu for the creation and
maintenance of customized menus.
4. Press the NEXT key until the following screen is displayed. (if
applicable)
Compressor Relay K4 XXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX (MORE)
Used With: All IntelliPak I Rooftop
Units and Air Handlers with DX
Cooling installed.
Possible Values: Second Field: ON,
OFF, LOCKED
Bottom Field: Enabled or any item
from Lockout Sources List.
1. Pressing the NEXT key will scroll forward through the screens.
2. Pressing the PREVIOUS key will scroll backwards to view the
previously displayed screen.
3. Press the + (Plus) key while viewing any screen to add that screen
to the custom menu. Refer to the custom menu for the creation and
maintenance of customized menus.
4. Press the NEXT key until the following screen is displayed. (if
applicable)
Ckt 2 Compr Relay K4: LOCKED
Disabled By Evap Temp Sensor Fail (MORE)
Used With: All IntelliPak II Rooftop
units or Air Handlers with DX
Cooling.
Possible Values: K4: ON, OFF,
LOCKED; Second Field: Enabled or
any item from Lockout Sources List
1. Pressing the NEXT key will scroll forward through the screens.
2. Pressing the PREVIOUS key will scroll backwards to view the
previously displayed screen.
3. Press the + (Plus) key while viewing any screen to add that screen
to the custom menu. Refer to the custom menu for the creation and
maintenance of customized menus.
4. Press the NEXT key until the following screen is displayed. (if
applicable)

Trane IntelliPak I Specifications

General

Brand	Trane
Model	IntelliPak I
Category	Air Conditioner
Language	English