Making calls with multiple lines 127
Deflecting a call to a DSS station
Prerequisite: The deflect function must be approved for DSS keys. For informa-
tion on the current setting, see ïƒ Page 83.
If you receive a call on one of your lines, you can immediately deflect it to the
DSS station.
T Your phone rings and a line key flashes.
S Press the relevant DSS key. The call is deflected to the DSS station. If the DSS
station does not answer, you can pick up the call by pressing the DSS key.
LED display on DSS keys
DSS Key Explanation
S Off: The line is in idle mode.
T
Flashes: You can accept a call for the DSS station via the key. The
call is routed to your primary line when the call is accepted.
R
Illuminates: The line is busy. Provided that second call is activated
you can still reach the DSS station via the key. It can accept your
call as a second call.
To Next Page
Loading...
Need help?
General