Mobility 151
Logging on with forced, delayed logoff at a
remote phone
If the remote phone is busy and your administrator enabled "Forced logoff during
call" with a set timeout, forced logoff does not occur until this timeout expires.
Logon via a key
If a program key is configured for Mobility.
S Press the "Mobility" program key.
or Logon via the context menu
Select and confirm the option shown in the idle display context menu
ïƒ Page 27.
You are prompted to enter your mobility ID.
j Enter and confirm Mobility ID, usually a telephone number.
You are prompted to enter the password.
j Enter and confirm the user password.
The following mobility messages appear in the display:
• Validating
• Logging off elsewhere
• Registering
• Downloading user data
Once logon is complete, the "Mobility" program key LED lights up and the mo-
bility icon appears in the graphic display .
At the same time, the graphic display on the busy remote phone shows
"Forced logoff pending". After the set timeout, the active call is ended and
remote logoff is performed.
To Next Page
Loading...
Need help?
General