186 Individual phone configuration
Settings for the "Pattern" ringtone type
If you selected "pattern" as the ringtone type, you can make further settings for
the pattern melody and pattern sequence:
Select the option shown.
Select the required pattern melody
between 1 and 8 in the context menu (e.g. 4).
You will hear the associated Ringer melody. Confirm the selected Ringer melo
-
dy.
Select the option shown.
Select the required Ringer tone sequence in the context menu between 1 and 6
(e.g.
2). You will immediately hear the set Ringer melody with the selected Ring-
er tone sequence. Confirm the selected setting.
Select and confirm the option shown.
Tone and indication with an unsecured voice
connection
Use this option to activate an alerting tone that you hear when a secure voice
connection with the party you are currently talking to ceases to be secure. The
message "Nonsecure connection" also appears.
Prerequisite: Secure connection setup is the preference set by your adminis-
trator.
z
You can also configure this setting via the WBM interface ïƒ Page 206.
N Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.j Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown in the context menu.
Select and confirm the option shown.
To Next Page
Loading...
Need help?
General