Getting to know your OpenStage phone 37
Control and monitoring function
A control or monitoring function can be activated on your phone for service purposes by remote
maintenance.
Control function
The administrator has the option to activate and deactivate features of the phone via remote main-
tenance. During maintenance the handset, microphone, loudspeaker and headset are deactivat-
ed. You are additionally informed on the display that the control function is active.
Monitoring function
In order to detect malfunctioning of a phone for example, the administrator installs a monitoring
function. You can use your phone as normal during monitoring. However you will first be informed
about the operation with a message on the display and prompted to allow monitoring.
If the administrator has activated a function on your phone, which continuously transmits operating
data to a server, you will see the flashing icon
in the upper display line.
Activating a diagnostic call
In the event of connection problems with a specific destination, the administrator may ask you to
enter an activation code before the number of the subscriber, which can be used to initiate tracing
of the call data on the phone. The activation code, which must be provided to you by the adminis
-
trator and which comprises a leading asterisk, followed by three digits and the hash sign as the
terminating character, must be entered before the actual phone number. At the end of the call, the
call-related data is sent for further analysis to the DLS server, which then passes it to the "Open
-
Scape Voice Trace Manager".
Contributing to environmental protection by saving
energy
The user can save energy actively using the energy settings on the telephone and in this way con-
tribute to protecting the environment.
To reduce energy consumption, you can
• reduce the brightness of the display (the default setting is 50 percent and is preset ïƒ Page 174).
• set the background lighting to switch off automatically after a certain period of time. To save a
large amount of energy, the time can be reduced to one minute. The default value is 5 minutes
(
ïƒ Page 174).
• reduce the ring volume (set by default to 50 %
ïƒ Page 180).
To Next Page
Loading...
Need help?
General