76 Programmable sensor keys
Programming sensor keys
z
The sensor keys can also be programmed via the WBM interface ïƒ Page 206.
Starting programming
Directly via a sensor key
S Hold down the sensor key to which a function should be assigned until the pro-
gramming prompt is displayed.
Confirm to begin programming. The sensor key illuminates continuously.
or Via the user menu
You can also program keys via the user menu.
N Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.j Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown. You are prompted to press the key you
wish to program.
S Press the sensor key you want to program with a function. The sensor key illu-
minates continuously.
Beginning programming
Select and confirm the option shown to program the first level.
or
Select and confirm the option shown to program the second level.
Select and confirm the required function in the list (e. g. Do not disturb).
Select and confirm the option shown if you want to change the label on the
graphic display.
j Enter and confirm the label you want.
Select and confirm the option shown.
If the prompt is not displayed or a programmed function is not executed,
then you can only launch key programming via the user menu (ask your
administrator about the current setting).
To Next Page
Loading...
Need help?
General