2GM
1-6-45
Enter maintenance mode.
Enter 065 using
up/down cursor keys.
Yes
No
Start
Press the system menu/counter key.
Place an original and press
the start key to make a test copy.
(Printing cannot be stopped until the
preset number of sheets is printed.)
Is the image correct?
Setting range: –25 to +25
Initial setting: 0
Changing the value by 1 changes
the magnification by 0.1%.
Increasing the value makes
the image longer, and decreasing it
make the image shorter.
Press the system menu/counter key.
For copy example 1, increase the
value using the right cursor key.
For copy example 2, decrease the
value using the left cursor key.
Press the enter key.
The new setting
is stored.
Press the enter key.
Select Sub Scan Adj.
(auxiliary scanning direction)
using up/down cursor keys.
End
Press the back key to
exit maintenance mode.
(5) Adjusting magnification of the scanner in the auxiliary scanning direction
Perform the following adjustment if the magnification in the auxiliary scanning direction is not correct.
U070
(P. 1-6-49)
U065
(auxiliary scanning
direction)
U065
(main scanning
direction) (P. 1-6-44)
Caution:
Before making the following adjustment, ensure that the above adjustments have been made in maintenance mode.
Procedure
Original Copy
example 1
Copy
example 2
Figure 1-6-56
To Next Page
Loading...
Need help?
General
