EasyManuals Logo
Home>Welch Allyn>Medical Equipment>Connex Spot Monitor

Welch Allyn Connex Spot Monitor Directions For Use

Welch Allyn Connex Spot Monitor
166 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
About warnings and cautions
Warning and caution statements can appear on the monitor, on the packaging, on the
shipping container, or in this document.
The monitor is safe for patients and clinicians when used in accordance with the
instructions and the warning and caution statements presented in this manual.
Before using the monitor, familiarize yourself with the sections of this directions for use
that pertain to your use of the monitor.
WARNING The warning statements in this manual identify conditions or
practices that could lead to illness, injury, or death.
CAUTION The caution statements in this manual identify conditions or
practices that could result in damage to the equipment or other property, or
loss of patient data.
General warnings and cautions
WARNING Patient injury risk. Many environmental variables, including
patient physiology and clinical application, can affect the accuracy and
performance of the monitor. Therefore, you must verify all vital signs
information, especially NIBP and SpO2, before treating the patient. If there
is any question about the accuracy of a measurement, verify the
measurement using another clinically accepted method.
WARNING Patient injury risk. To ensure data integrity and patient
confidentiality, save readings and clear the monitor's display between
patients.
WARNING Personal injury risk. The power cord is the disconnect device to
isolate this equipment from supply mains. Position the equipment so that it
is not difficult to reach or disconnect the cord.
WARNING Patient injury risk. Damaged cords, cables, and accessories can
affect patient and operator safety. Never lift the monitor by the power
supply cord or patient connections. Routinely inspect the AC power cord,
blood pressure cuff, SpO2 cable, and other accessories for strain relief
wear, fraying, or other damage. Replace as necessary.
WARNING Patient injury risk. During defibrillation, keep discharge paddles
away from monitor sensors and other conductive parts in contact with the
patient.
7

Table of Contents

Other manuals for Welch Allyn Connex Spot Monitor

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Welch Allyn Connex Spot Monitor and is the answer not in the manual?

Welch Allyn Connex Spot Monitor Specifications

General IconGeneral
BrandWelch Allyn
ModelConnex Spot Monitor
CategoryMedical Equipment
LanguageEnglish

Related product manuals