EasyManuals Logo
Home>Welch Allyn>Medical Equipment>Connex Spot Monitor

Welch Allyn Connex Spot Monitor Directions For Use

Welch Allyn Connex Spot Monitor
166 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #144 background imageLoading...
Page #144 background image
7
Some models of commercially available bench-top functional testers and patient
simulators can be used to verify the proper functionality of Nellcor pulse oximeter
sensors, cables and monitors. See the individual testing device's operator's directions for
use for the procedures specific to the model of tester being used.
8
Many functional testers and patient simulators have been designed to interface with
the pulse oximeter's expected calibration curves and may be suitable for use with
Nellcor monitors and/or sensors. Not all such devices, however, are adapted for use with
the Nellcor OXIMAX digital calibration system. While this will not affect use of the
simulator for verifying system functionality, displayed SpO2 measurement values may
differ from the setting of the test device. For a properly functioning monitor, this
difference will be reproducible over time and from monitor to monitor within the
performance specifications of the test device.
Environmental specifications
Operating temperature 50°F to 104°F (10°C to 40°C)
Storage temperature -4°F to 122°F (-20°C to 50°C)
Operating altitude -1250 to 10,000 ft. (-381 m to 3,048 m)
Operating humidity 15% to 90% noncondensing
Storage humidity 15% to 95% noncondensing
Monitor radio
The monitor's radio operates on 802.11 networks.
Wireless network
interface
IEEE 802.11 a/b/g/n
Frequency 2.4 GHz frequency bands 5 GHz frequency bands
2.4 GHz to 2.483 GHz 5.15 GHz to 5.35 GHz, 5.725 GHz to 5.825Ghz
Channels 2.4 GHz channels 5 GHz
Up to 14 (3 non-overlapping); country-
dependent,
Up to 23 non overlapping; country-dependent
Authentication/
Encryption
Wireless Equivalent Privacy (WEP, RC4 Algorithm); Wi-Fi Protected Access (WPA); IEEE 802.11i
(WPA2); TKIP, RC4 Algorithm; AES, Rijndael Algorithm; Encryption Key Provisioning; Static (40-
bit and 128-bit lengths); PSK; Dynamic; EAP-FAST; EAP-TLS; EAP-TTLS; PEAP-GTC
1
PEAP-
MSCHAPv2; PEAP-TLS;
Antenna
Ethertronics WLAN_1000146
Wireless data rates
802.11a (OFDM): 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b (DSSS, CCK): 1, 2, 5.5, 11 Mbps
802.11g (OFDM): 6, 9, 12, 18, 24, 36, 48, 54 Mbps
138 Specifications Connex
®
Spot Monitor

Table of Contents

Other manuals for Welch Allyn Connex Spot Monitor

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Welch Allyn Connex Spot Monitor and is the answer not in the manual?

Welch Allyn Connex Spot Monitor Specifications

General IconGeneral
BrandWelch Allyn
ModelConnex Spot Monitor
CategoryMedical Equipment
LanguageEnglish

Related product manuals