Startup
Power
The Power button, located on the lower-left corner of the monitor, performs multiple
functions.
• Powers up the monitor
• Wakes the monitor from Sleep mode
• Opens a pop-up dialog with controls to sign out, power down, and enter Sleep mode
(except when an alarm condition is active)
CAUTION Do not use a long press of the Power button to power down
the monitor when it is functioning normally. You will lose patient data and
configuration settings. Touch the Settings > Device tabs to power down
the monitor.
The LED in the center of the power plug symbol indicates the battery charging status.
•
Green indicates that AC power is present and that the battery is fully charged.
• Amber indicates that AC power is present and that the battery is charging.
Power up the monitor
The monitor runs a brief diagnostic self-test each time it powers up. If an alarm situation
occurs, the alert appears in the Status area.
WARNING To ensure patient safety, listen for two audible indicators (a
beeper and a speaker tone) and watch for visual alerts at power-up at least
once daily. Correct any system errors before using the monitor. In addition
to the audible indicators, the screen Status area displays color coding,
icons, and messages that help you to distinguish clinical priority and
actions, if needed.
Type of alert Color
High Alarm
Red
Medium Alarm
Flashing amber
25
To Next Page
Loading...
Need help?
General
