140 5 Control Panel Settings
[Sleep Mode]
[Sleep Mode Timer]
[Auto Job History]
System Settings
Sleep Mode
Setting Description
Sleep Mode Consumes less electricity than the Low Power mode. Set whether or not to
enable this feature.
• [Enabled] (default)
• [Disabled]
Note
• When [Low Power Mode] is set to [Disabled], [Sleep Mode] cannot be set to
[Disabled].
Refer to
• “2.4 Setting/Exiting the Energy Saver Modes” (P. 47)
System Settings
Sleep Mode Timer
Setting Description
Sleep Mode Timer Sets the time before the printer enters the Sleep mode. Specify the value from
1 to 240 minutes in 1-minute increments. *2 (See P. 171.)
• [1 Minutes] (default)
Refer to
• “2.4 Setting/Exiting the Energy Saver Modes” (P. 47)
• “Setting Example: Changing the Sleep Mode Timer” (P. 108)
System Settings
Auto Job History
Setting Description
Auto Job History Sets whether or not to automatically print the [Job History Report] on the
completed print jobs.
• [Do not print] (default)
Does not automatically print the [Job History Report].
•[Print]
When memory fills up to its maximum of 50 print jobs, a history of past jobs
that have not been output is automatically output starting with the oldest print
job. Data being printed or queued print data is not recorded in this history.