216 7 Maintenance
Resetting the Counter
After replacing the fuser unit, perform the required control panel operations to reset their
respective counters.
When replacing the fuser unit, be sure to reset the counter on the control panel.
1. On the control panel, press the < > and
<OK> buttons at the same time.
This displays the [Consumables Menu].
2. Press the < > so [Reset Counter] is
displayed.
3. Press either the < > or <OK> button to
select.
[Fuser Assembly] is displayed.
4. Press either the < > or <OK> button to
select.
5. This resets the counter for the fuser unit.
6. Press the <Menu> button to close the
menu.
Consumables Menu
Non-Genuine
Consumables Menu
Reset Counter
Reset Counter
Fuser Assembly
Fuser Assembly
Use OK to reset
Fuser Assembly
Reset completed
To Next Page
Loading...
Need help?
General