78 3 Printing
5. Specify the [Enter Hour] and [Minutes] for the printing start time.
Use 24-hour format to specify the time.
6. For [Document Name], select [Enter Document Name] or [Use Existing Name]. If you
selected [Enter Document Name], name the document by entering up to 12 single-
byte characters into [New Document Name].
If you selected [Use Existing Name], the document name will be the name of the
document to be printed. If the printer cannot identify the name of the document, the
date and time that the document will be printed is used for the name.
7. Click [OK].
8. On the [Paper/ Output] tab, click [OK].
9. Click [Print] on the [Print] dialog box to start printing.
Printing will start when the specified time is reached.
Canceling a Delayed Print Job
You can use the control panel to cancel a Delayed Print job or to print a Delayed Print job
immediately, regardless of the specified time.
1. On the control panel, press the <Secure
Print/Sample Set> button.
Note
• In some environments, [Pte. Charge Print] will appear
on the display first.
2. Press the < > button until [Delayed Print]
is displayed.
3. Press the < > or <OK> button to select.
A document name appears.
4. Press the < > button until the desired
document name appears.
Note
• The document name is the name (of up to 12 bytes)
specified for [Document Name] on the [Delayed Print]
dialog box of the print driver.
Print Menu
Secure Print
Print Menu
Delayed Print
Select Document
1.Report
To Next Page
Loading...
Need help?
General