A.11 Notes and Restrictions 303
• In an IPv6 network environment that does not have a DNS server, authentication fails
when the computer name is specified in the SMB authentication SMB server setting.
Directly specify the IPv6 address for the computer name of the authentication server
computer name.
• With DocuShare or some other external access service, operation is improper when an
IPv6 address is specified as the connection destination URL. In the IPv6 environment,
enable the DNS server and specify the destination URL using an FQDN.
Notes and Restrictions on the Cloning Feature
The Cloning feature copies settings from one printer and imports them to another printer.
You can copy these settings to a file and import them with CentreWare Internet Services
under the [Properties] tab > [General Setup] > [Cloning].
This section lists the notes and restrictions that apply when using the Cloning feature.
• This feature does not copy and import all printer settings. It mainly copies and imports
settings on the [Properties] tab in CentreWare Internet Services.
The settings in the following categories can all be cloned.
Feature Category
Connectivity Settings Ethernet
Parallel*
* The optional parallel port is required.
USB
USB-2
EtherTalk
NetWare
TCP/IP
TCP/IP (IPv4)
TCP/IP (IPv6)
TCP/IP (DualStack)
SSDP
Microsoft Networking
LPR/LPD
Port 9100
HTTP
WSD
Xerox Standard Accouting Users
Limits and Access
Group Accounts
To Next Page
Loading...
Need help?
General