150 5 Control Panel Settings
Receive
Control
Sets how received print jobs are handled.
• [ReferPrintAuditron] (default)
• [PrivateChargePrint]
Saves jobs with User IDs to private charge print regardless of
whether or not the authentication feature is used.
• [Save in ChargePrint]
Saves all received jobs to charge print regardless of whether or not
the authentication feature is used.
Important
• When [Save in ChargePrint] is set, all print jobs are saved even if
authentication succeeds or fails. To prevent unwanted print jobs from
building up, either set up automatic deletion or manually delete print
jobs that have exceeded their storage period set under [Doc. Expiry
Date]. For more information on how to set the storage period, refer to
“[Stored Documents]” (P. 151).
Note
• This feature is displayed only when the hard disk (option) is installed.
• When [PrivateChargePrint] and [Save inChargePrint] are set, secure
print, sample set or delayed print are ignored even if you specify
them on the print driver.
Process
Job Login
Sets the processing method when a print job is received.
[Job Login Success]
Sets the processing method when successfully authenticated jobs are
received.
• [Print Job] (default)
Print jobs are printed.
• [PrivateChargePrint]
Print jobs are saved to Private Charge Print.
[Job Login Failure]
Sets the processing method when failed authentication jobs are
received.
• [Save in ChargePrint]
• [Cancel Job] (default)
[Without User ID]
Sets the processing method when a print job without a User ID is
received.
• [Save in ChargePrint]
• [Cancel Job] (default)
Note
• This feature appears when the hard disk (option) is installed, and
[ReferPrintAuditron] is selected for the [Receive Control] setting.
Setting Description
To Next Page
Loading...
Need help?
General