FreeFlow Process Manager Operator and Administrator Guide
2-176
Workflow Builder
Adding or editing a folder-based profile
A combined total of 10 folder-based profiles and CLI profiles can
be configured for each external process. For folder-based profiles,
the input, output, and error locations must reside on the same
remote machine, or on the same local machine.
To add or edit a folder-based profile
Refer to Adding or editing an external process to add an external
process, and then set up a folder-based profile as follows:
1. In the Folder Profile Setup dialog, enter or change the name
for the profile.
NOTE: Changing a name or a folder affects existing workflows.
2. To select process input, process output, and error folders, do
the following:
NOTE: You will be asked for a user name and password when a
remote location is selected during setup.
a. Select [Browse].
b. In the Browse For Folder dialog, do one of the following:
– Select the desired folder, and then select [OK].
If you select a remote location, the Remote Connection
dialog displays. Enter the appropriate User name and
Password, and select [OK].
–Select [Make New Folder], name the folder, and select
[OK].
3. In the timeout drop box, select a duration.
4. Select [OK]. If you edited an existing profile, a confirmation
dialog displays. The new profile displays in the Process
Profiles text box.
To Next Page
Loading...
Need help?
General
