Xerox WorkCentre 4265 System Administrator Guide

Initial Setup
20 Xerox
®
WorkCentre
®
4265 Multifunction Printer
System Administrator Guide
Changing the System Administrator Password
Xerox recommends that you change the default system administrator password after you configure the
printer. Be sure to store the password in a secure location. The default password is 1111.
1. In CentreWare Internet Services, click Properties.
2. Click Maintenance > Administrator Password.
3. Type the password, then type the password again to verify.
4. To save the new password, for Select to save new password, select the check box.
5. Click Save.

Xerox WorkCentre 4265 Specifications

General

Brand	Xerox
Model	WorkCentre 4265
Category	All in One Printer
Language	English