Xerox WorkCentre 4265 System Administrator Guide

Network Connectivity
44 Xerox
®
WorkCentre
®
4265 Multifunction Printer
System Administrator Guide
Connecting to a Wireless Network Using the
Wireless Install Wizard
Before you begin, ensure that you have the wireless network Service Set Identifier (SSID), encryption
type, and passphrase. For details, see Connecting to a Wireless Network Manually on page 45.
1. Plug the Wireless Network Adapter into the USB port on the left side of the printer, then disconnect
the Ethernet cable.
2. At the printer control panel, press the Machine Status button.
3. Touch Tools > Network Settings > Network Connectivity > Wireless.
Note: To access this feature at the control panel, log in as an administrator.
4. To connect to a network, touch Pick Another Network.
5. From the list of available networks, select a network.
6. Touch Continue.
7. Touch Network Login.
8. To access the network, enter the passcode for the selected network, then touch Next.
9. On the Network Confirmation screen, note the IP Address, then touch Done.
Note: For the new settings to take effect, restart your printer.

Xerox WorkCentre 4265 Specifications

General

Brand	Xerox
Model	WorkCentre 4265
Category	All in One Printer
Language	English