Xerox WorkCentre 4265 System Administrator Guide

Security
Xerox
®
WorkCentre
®
4265 Multifunction Printer 65
System Administrator Guide
IPsec
Internet Protocol Security (IPsec) is a group of protocols used to secure Internet Protocol (IP)
communications by authenticating and encrypting each IP data packet. It allows you to control IP
communication by creating protocol groups, policies, and actions.
You can control IP communication on the printer for the following:
• DHCP v4/v6 (TCP and UDP)
• DNS (TCP and UDP)
• FTP (TCP)
• HTTP (Scan Out, TCP port 80)
• HTTPS (Scan Out, TCP port 443)
• HTTPS (Web Server, TCP port 443)
• ICMP v4/v6
• IPP (TCP port 631)
• LPR Print (TCP port 515)
• Port 9100 Print (TCP port 9100)
• SMTP (TCP/UDP port 25)
• SNMP (TCP/UDP port 161)
• SNMP Traps (TCP/UDP port 162)
• WS-Discovery (UDP port 3702)
• Up to 10 additional services
Configuring IPsec
1. In CentreWare Internet Services, click Properties > Security.
2. Click IPsec.
3. To enable the protocol, for Protocol, select Enabled.
4. To remove IPsec connections, click Flush All IP Sec Connections.
5. For Shared Secret, enter the shared key value.
6. For Verify Shared Secret, reenter the shared key value.
7. Click Apply.

Xerox WorkCentre 4265 Specifications

General

Brand	Xerox
Model	WorkCentre 4265
Category	All in One Printer
Language	English