Xerox WorkCentre 4265 System Administrator Guide

Security
Xerox
®
WorkCentre
®
4265 Multifunction Printer 61
System Administrator Guide
Secure HTTP (SSL)
You can establish an HTTP Secure(HTTPS) connection to the printer by encrypting data sent over HTTP
using SSL.
You can also enable SSL encryption for the following features.
• Configuring the printer in CentreWare Internet Services
• Printing from CentreWare Internet Services
• Printing using IPP
• Managing scan templates
• Workflow scanning
• Network accounting
Note: SSL encryption is protocol-independent. You can turn on or off SSL for each protocol or scan
destination as needed
Before you begin:
• Ensure that the printer has an established Machine Digital Certificate.
• Ensure DNS is enabled and configured.
• Ensure that the date and time configured on the printer is correct. The time that is set on the printer
is used to set the start time for the Xerox
®
Device Certificate. A Xerox
®
Device Certificate is installed
when you enable HTTP (SSL).
Enabling HTTPS (SSL)
1. In CentreWare Internet Services, click Properties > Connectivity > Protocols.
2. Click HTTP.
3. To enable the protocol, for Protocol, select Enabled.
4. For Keep Alive Timeout, enter the time that the printer waits for a response from a connected user
before it terminates the connection. Increasing the Keep Alive Timeout can cause slow connections.
5. Change the Port Number as needed.
Note: If a machine digital certificate is configured, you can edit the following fields.
6. For HTTP Security Mode, select an SSL security option.
7. To allow connections to the device using SSL v3 only, for Require SSL v3, select Enable.
8. Click Apply.

Xerox WorkCentre 4265 Specifications

General

Brand	Xerox
Model	WorkCentre 4265
Category	All in One Printer
Language	English