Installation and Setup
Xerox
®
WorkCentre
®
EC7836/EC7856 Color Multifunction Printer 41
User Guide
OK. To specify the time that the printer sleeps on the specified day, touch Energy Saver
Time. To select the time, touch the arrows. Touch OK.
• Touch OK.
4. Touch OK.
Setting the Date and Time at the Control Panel
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Device Settings > General > Date and Time.
Note: If this feature does not appear, log in as a system administrator. For details, see Logging In as the
System Administrator at the Control Panel on page 30.
3. To set the time zone, touch Time Zone, touch the Geographic Region drop-down list, then touch your
region. Use the Up or Down arrows to navigate and select your Time Zone.
Note: The date and time are set automatically through Network Time Protocol (NTP). To modify these
settings, go to the Properties tab in Xerox
®
CentreWare
®
Internet Services and change the Date and
Time Setup to Manual (NTP Disabled).
4. To set the date:
a. Touch Date.
b. Touch the Year field. To set a number, use the arrows.
c. Touch the Month field. To set a number, use the arrows.
d. Touch the Day field. To set a number, use the arrows.
e. Touch Format, then touch the date format that you want to use.
5. To set the time:
a. Touch Time.
b. To specify the 12-hour or 24-hour format, touch Display 24 hour Clock.
c. Touch the Hours field. To set a number, use the arrows.
d. Touch the Minutes field. To set a number, use the arrows.
e. If your printer is set to display the 12-hour clock, touch AM or PM.
6. Touch OK.
To Next Page
Loading...
Need help?
General