Yaesu FT2DR User Manual

140
Customize Menu Settings for Individual Use (Set Mode)
Set Mode: SIGNALING Menu Operations
Setting the Squelch to Activate at a Specified Signal Strength
S-Meter Squelch Function
You can set A-Band and B-Band individually to emit audio only when receiving a signal
stronger than the S-meter Squelch level setting.
To adjust the S-Meter squelch, first set the operating band by pressing the
key.
1 Touch [9 SQL S-METER].
2 Rotate the DIAL to select the setting value referring to the table below.
Remark The default setting: OFF
Display S-Meter Display Operating Status
OFF No display
S-Meter squelch function is OFF.
(By default, S-Meter squelch function is set to
OFF.)
LEVEL1
Outputs the audio of a signal as strong or
stronger than the S-Meter level 1.
LEVEL2
Outputs the audio of a signal as strong or
stronger than the S-Meter level 2.
LEVEL3
Outputs the audio of a signal as strong or
stronger than the S-Meter level 3.
LEVEL4
Outputs the audio of a signal as strong or
stronger than the S-Meter level 4.
LEVEL5
Outputs the audio of a signal as strong or
stronger than the S-Meter level 5.
LEVEL6
Outputs the audio of a signal as strong or
stronger than the S-Meter level 6.
LEVEL7
Outputs the audio of a signal as strong or
stronger than the S-Meter level 7.
LEVEL8
Outputs the audio of a signal as strong or
stronger than the S-Meter level 8.
LEVEL9
Outputs the audio of a signal as strong or
stronger than the S-Meter level 9.
Setting the Squelch Type for Transmit and Receive
SQL EXPANSION Function
You can add squelch types to [11 SQL TYPE] for transmit and receive, respectively.
1 Rotate the DIAL, then touch [10 SQL EXPANSION].
2 Rotate the DIAL to select the desired setting.
ON Add squelch types for transmit and receive, respectively.
OFF Does not add squelch types for transmit and receive, respectively.
Remark The default setting: OFF

Yaesu FT2DR Specifications

General

Brand	Yaesu
Model	FT2DR
Category	Transceiver
Language	English