Yaesu FT2DR User Manual

89
Using the GPS Function
Method of Positioning by GPS
Saving GPS Information (GPS Log Function)
The GPS position information can automatically be saved periodically onto a microSD
memory card. Using the saved data, tracks can be displayed on commercially available
map software*.
* Technical support for the map software is not provided by YAESU.
1 See “Activating the GPS Function” on page 86, and activate the GPS function.
2 Press the key for over one second.
The transceiver enters Set mode.
3 Touch [CONFIG].
4 Touch [6 GPS LOG].
5 Rotate the DIAL to select the GPS data logging interval.
The selectable setting values are as follows. When OFF is set, the position
information is not saved.
OFF / 1 sec / 2 sec / 5 sec / 10 sec / 30 sec / 60 sec
6 Press .
The GPS log function is activated, and the transceiver exits from Set mode.
Tip
The position information is saved periodically unless “OFF” is selected in step 5 (shown above) or the
power of the transceiver is turned off.
Reselecting the GPS data logging interval in step 5 or turning on the transceiver again, begins saving
the GPS data under a different file name.

Yaesu FT2DR Specifications

General

Brand	Yaesu
Model	FT2DR
Category	Transceiver
Language	English