96
Convenient Functions
Dual Receive (DW) Function
The transceiver is equipped with the following 3 types of Dual Receive Functions:
• VFO Dual Receive
• Memory Channel Dual Receive
• Home Channel Dual Receive
The transceiver checks signals over the frequency registered to the selected memory
channel (Priority Memory Channel) once approximately every 5 seconds. When the
transceiver detects signals, it starts signal reception on the selected memory channel.
While receiving a signal on the frequency registered to a priority memory channel,
pressing
disables the Dual Receive function and allows transmission over the same
frequency.
Example: Checking the priority memory channel “90” (446.500 MHz), while receiving
“146.520 MHz”
Frequency being received
The transceiver monitors signals on
the frequency registered to the Priority
Memory Channel “90” (446.500 MHz),
once approximately every 5 seconds.
When the transceiver receives a signal
on the frequency registered to the
priority memory channel “90”, dual
reception stops and signal receiver
switches to “90” (446.500 MHz).
To Next Page
Need help?
General
