58
A Wide Variety of Memory Functions
2 Touch [HOME].
The home channel of the currently selected frequency band appears on the LCD.
Tips • For details on the home channels displayed on the LCD, see the following table.
• After selecting the desired frequency, rotating the DIAL returns the transceiver to VFO
mode.
Frequency band Frequency Frequency band Frequency
AM Band 540 kHz 174 to 222 MHz band 174.000 MHz
FM Band 76.000 (88.000) MHz Information radio band (1) 222.000 MHz
SW band 1.800 MHz 430 MHz band 446.000 (430.000) MHz
50 MHz 50.000 MHz 470 to 770 MHz band 47.000 MHz
AIR band 108.000 MHz Information radio band (2) 860.000 MHz
144 MHz band 146.520 (144.000) MHz
Returning to the Previous Frequency
1 Touch [F MW].
The function menu appears on the LCD.
2 Touch [HOME].
The frequency band selected before recalling the home channel appears on the LCD.
Changing the Home Channel Frequency
Change the home channel frequencies from the default setting.
1 Press the key to enter VFO mode.
2 Rotate the DIAL to tune in to the frequency you want to set as a home channel.
3 Touch [F MW] for over one second.
4 Touch .
5 Touch [H.WRITE].
6 “OVERWRITE?” appears.
7 Select [OK], then touch [OK] to confirm.
Overwriting completes and the home channel frequency is changed.
To Next Page
Loading...
Need help?
General
