155
Customize Menu Settings for Individual Use (Set Mode)
Set Mode: SD CARD Menu Operations
Saving/Loading Memory Channel Information to/from microSD
Memory Card
Memory channel setting information can be saved onto a microSD memory card, or saved
information can be loaded to the transceiver.
1 Rotate the DIAL, then touch [2 MEMORY CH].
2 Rotate the DIAL to select the operation to be performed.
Write to SD
Saves the memory channel information saved on the transceiver
onto a microSD memory card.
Read from SD Loads the information to the transceiver from the microSD memory
card.
3 Press the key.
A pop-up window appears on the LCD.
4 Touch [OK].
5 Touch [OK] again.
When [Write to SD] is selected and data writing completes, a beep sounds and
“COMPLETED” appears on the LCD.
When [Read from SD] is selected and data reading completes, a beep sounds, then
the transceiver restarts with the settings read from the microSD memory card applied.
Saving/Loading GROUP ID Information to/from a microSD Memory
Card
The Group ID setting information can be saved onto a microSD memory card, or saved
information can be loaded to the transceiver.
1 Rotate the DIAL, then touch [3 GROUP ID], then press the key.
2 Rotate the DIAL to select the operation you want to perform.
Write to SD Saves the GROUP ID information saved on your transceiver to a
microSD memory card.
Read from SD Loads the information to your transceiver from a microSD memory
card.
3 Press the key.
Displays a list of the groups registered with the transceiver (or saved on the microSD
memory card).
4 Select the group you want to copy to or from the microSD memory card using the
key.
☒ is displayed for the selected image and □ is displayed for unselected images.
5 Touch [WRITE] or [READ].
A pop-up window appears on the LCD.
6 Touch [OK].
To Next Page
Need help?
General
