3-2
REMOTE CONTROL TYPES AND APPLICATIONS
A Yamaha outboard motor has one of two throttle control systems, either “Push To Open” or “Pull
To Open”.
For example, “Push To Open” means the throttle valve opens when the remote control inner cable is
extended and then the throttle arm is pushed.
Most models have “Push To Open” system.
However, some following models have “Pull To Open” system.
The 10-pin connector is usually used for PTT and/or PT (Power Tilt) models.
The 7-pin connector is for manual tilt models. But, F9.9J (F9.9B), FT9.9L (T9.9B), F15C (F15A) and
F20B (F20A) have the 10-pin connector.
Install the remote control box so that there is sufficient clearance between steering wheel and
remote control lever operation area.
“Pull to Open” models
20D
25B
E25B
25N 30D
30H
E30H
E40J EK40J E40G 55B E60H
To Next Page
Loading...
Need help?
General
