Yealink T4 Series IP Phones User Guide
57
Call Pickup
You can use call pickup to answer someone else’s incoming call on your phone.
The phone supports the following two call pickup features:
l Directed Call Pickup: allows you to pick up incoming calls to another phone.
l Group Call Pickup: allows you to pick up incoming calls to any phone within a predefined group.
Check with your system administrator to find out if this feature is available on your phone.
Topics
Picking up a Call Directly
Picking up a Group Call Directly
Picking up a Call with a Directed Pickup Key
Picking up a Call with a Group Pickup Key
Picking up a Call Directly
You can answer a call that rings on another phone.
Before You Begin
The target phone receives an incoming call. Your system administrator has enabled the directed call pickup and set the
directed call pickup code.
Procedure
1. Pick up the handset, press the line key or the Speakerphone key .
The DPickup appears on the phone screen (You may need to select the More( ) soft key to see the
DPickup soft key).
2. Select DPickup on your phone.
3. Enter the phone number which is receiving an incoming call.
4. Select DPickup again.
The call is answered on your phone.
Tip
When the phone is idle, you can use a Directed Pickup or BLF/BLF List key to pick up a call to a specific contact directly.
Related Topics
Picking up a Call with a Directed Pickup Key
To Next Page
Loading...
Need help?
General
Weight and Dimensions
