Yealink T4 Series IP Phones User Guide
69
You can select to pick up the call to the monitored line, place a call to the monitored line, place a new call or go back
to the idle screen.
Note
If you press Cancel to go back to the idle screen, you can long press the BLF List key to enter the Calls for Pickup screen
again.
Ring Type for BLF Parked Call Monitor
The Audio Alert for BLF Parked Call Monitor feature allows your phone to play a tone when a call is parked against the
monitored user’s phone number.
Topic
Setting an Alert Tone for the BLF Parked Call Monitor
Setting an Alert Tone for the BLF Parked Call Monitor
You can set the alert ring type when there is a call parked to the monitored lines.
Before You Begin
Check with your system administrator to find out if the Audio Alert for BLF Parked Call Monitor feature is available.
Procedure
1. Navigate to Menu > Basic > Sound > Ring Type for BLF Parked Call Monitor.
On the T42S/T42G/T41S/T41P/T40P/T40G phones, navigate to Menu > Settings > Basic Settings > Sound > Ring
Type for BLF Parked Call Monitor.
2. Select the desired ring tone.
3. Select Save.
Visual Alert for BLF Parked Call Monitor
Your system administrator can configure your phone to display the call information when the specified monitored line
receives an incoming call.
You can select to retrieve the call parked to the monitored line, place a call to the monitored line, place a new call or go
back to the idle screen.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
