YOKOGAWA AQ6370C User Manual

7-37
IM AQ6370C-17EN
Remote Commands
1
2
3
4
5
6
7
8
App
Index
7.5 Common Commands
The instrument supports the “Required” common commands listed in the table below.
Cmd Name IEEE 488.2 Std. AQ6370C/AQ6370D/
AQ6373/AQ6375
*AAD
Accept Address Command Option
*CAL?
Calibration Query Option
*CLS
Clear Status Command Required Y
*DDT
Define Device Trigger Command *DT1 option
*DDT?
Define Device Trigger Query DT1 option
*DLF
Disable Listener Function Command Option
*DMC
Define Macro Command Option
*EMC
Enable Macro Command Option
*EMC?
Enable Macro Query Option
*ESE
Standard Event Status Enable Command Required Y
*ESE?
Standard Event Status Enable Query Required Y
*ESR?
Standard Event Status Register Query Required Y
*GMC?
Get Macro Contents Query Option
*IDN?
Identification Query Required Y
*IST?
Individual Status Query Required for PP1
*LMC?
Learn Macro Query Option
*LRN?
Learn Device Setup Query Option
*OPC
Operation Complete Command Required Y
*OPC?
Operation Complete Query Required Y
*OPT
Option Identification Query Option
*PCB
Pass Control Back Command Required if not C0
*PMC
Purge Macro Command Option
*PRE
Parallel Poll Register Enable Command Required for PP1
*PRE?
Parallel Poll Register Enable Query Required for PP1
*PSC
Power On Status Clear Command Option
*PSC?
Power On Status Clear Query Option
*PUD
Protected User Data Command Option
*PUD?
Protected User Data Query Option
*RCL
Recall Command Option
*RDT
Resource DescriptionTransfer Command Option
*RDT?
Resource Description Transfer Query Option
*RST
Reset Command Required Y
*SAV
Save Command Option
*SRE
Service Request Enable Command Required Y
*SRE?
Service Request Enable Query Required Y
*STB?
Read Status Byte Query Required Y
*TRG
Trigger Command Required if DT1 Y
*TST?
Self-Test Query Required Y
*WAI
Wait-to-Continue Command Required Y
Y: Commands supported by the AQ6370C, AQ6370D, AQ6373 and AQ6375

YOKOGAWA AQ6370C Specifications

General

Brand	YOKOGAWA
Model	AQ6370C
Category	Measuring Instruments
Language	English