Zebra PS20 Series User Manual

Data Capture
131
Enabling DataWedge
1. Swipe up from the bottom of the Home screen and touch .
2. Touch > Settings.
3. Touch the DataWedge enabled checkbox. A blue checkmark appears in the checkbox indicating that
DataWedge is enabled.
4. Touch .
Disabling DataWedge
1. Swipe up from the bottom of the Home screen and touch .
2. Touch > Settings.
3. Touch the DataWedge enabled checkbox. A blue checkmark disappears from the checkbox indicating that
DataWedge is disabled.
4. Touch .
Hands Free Scanning
Hands Free Scanning allows the user to capture barcode data when a barcode is placed within the view of the
device without pressing the trigger. Hands Free Scanning is enabled using the Hands Free Trigger settings or
when the device is placed in the cart/mount. Hands Free Scanning is set to disabled by default.
Settings
Use the Hands Free Trigger setting to configure scanning mode and the proximity trigger sensitivity.
Swipe down from the Status bar to open the Quick Access panel and then touch > Hands Free Trigger.

Zebra PS20 Series Specifications

General

Brand	Zebra
Model	PS20 Series
Category	Handhelds
Language	English